AL-KO EASYAIR RO-01, Инструкция по установке и эксплуатации

Страница: 35 / 76

Subject to changes in line with technical progress.
35
Assembly
3313737
IMPORTANT
Counter-hold using a suitable tool (e.g. pipe wrench) during connection of the heat exchang-
ers to avoid damage.
Install pipes and connections in such a way that the heat exchangers remain freely accessible
for maintenance.
„
Maximum working pressure: 16 bar
„
Maximum hot water flow temperature: 120 °C
„
Valves and actuators must be installed professionally. It should be noted here whether a version with 2-way valves,
3-way valves or with a combination of 2-way and 3-way valves is used.
„
For the electrical connection of the actuators, see the circuit diagram.
2-way valve, 3-way valve versions and combined 2-way and 3-way valve versions
2-way valves
1 2
5
6
3
6
6
4 5 4
3-way valves
1 2
5
6
3
6
6
4
5
4
3-way/2-way valves
5
6
1 2
6
3
6
4
5
4
2-way/3-way valves
5
6
1 2
6
3
6
4
5 4
1 PWW heater 4 Valve actuator
2 PCW cooler 5 Valve
3 Frost monitor 6 Recirculation pump (on-site)