AL-KO EASYAIR RO-01 Скачать руководство пользователя

Страница: 56 / 76

Installation and Operating Manual (translation)

AL-KO EASYAIR

8.5

Replacing components

8.5.1

Replacing filter bags

WARNING

Risk to health when changing the filters due to dust load and microbial contamination.

Switch off the unit on all poles and secure it against being restarted.

Adhere to the maintenance plan.

Wear the personal protective equipment (dust mask) when changing the filter.

Use other protective equipment according to the work carried out.

In general, the filter bags must be replaced when the permissible end pressure difference is reached.

NOTE

Do not wash and reuse used air filters; always replace them. Otherwise, the hygienic require

ments will not be met!

Release the clamping device by simply pulling it out using pull-out lever that is supplied loose.

Pull the filter bags out of the unit individually.

Clean the filter gaskets, inspect and replace any damaged gaskets.

Insert new filter bags and close the clamping device by pushing it in.

IMPORTANT

Only use original consumables and spare parts. This is the only way to ensure safe operation.
Otherwise the warranty will be voided!
A spare parts list can be found in the scope of the unit documentation.

The filter bags must be disposed of in accordance with the currently valid and applicable local

regulations!
Customer-Service

Phone: +49 8225 39 - 2574

E-mail: [email protected]

Web: www.al-ko.com

Содержание EASYAIR RO-01













































































Результаты поиска

Содержание EASYAIR RO-01

Отзывы:

Похожие инструкции для EASYAIR RO-01

Бренды по названию

Популярные бренды

AL-KO EASYAIR RO-01, Инструкция по установке и эксплуатации

Результаты поиска

Содержание EASYAIR RO-01

Отзывы:

Похожие инструкции для EASYAIR RO-01

Бренды по названию

Популярные бренды