Akron Brass SEVERE DUTY 3491, Инструкция по установке, эксплуатации и обслуживанию

Страница: 8 / 52

Page 6
PIN
Description
Monitor Function Comment
A Analog Common (Ground)
B Analog, Switch, PWM In #1 Rotation Position
C Analog, Switch, PWM In #2 Elevation Position
D Analog, Switch, PWM In #3 Unused Unused
E Analog Exc.
Power for limit
switches/Sensors
( +5 volts)
F Unused Unused Unused
G
H-Bridge
Axis #1
+ (Up)
Elevation
H - (Down)
J
H-Bridge
Axis #2
+ (Left)
Rotation
K - (Right)
L
H-Bridge
Axis #3
+ (Fog)
Pattern
M - (Stream)
N
H-Bridge
Axis #4
+ (Low)
Unused
P ‘- (High)
Table 2-2 Monitor/Turret Connector Pin-out
WARNING: Do not extend the monitor wiring harness.
ELECTRICAL INSTALLATION INSTRUCTIONS
A. CONTROLLER, JOYSTICK OR TETHER CONNECTOR ELECTRICAL ATTACHMENT
These instructions are for attaching the controller, joystick or the tether connector to the logic box.
STEP 1
3406 ELECTRIC RISER
WITH
6033 MINI UNIVERSAL CONTROLLER
6037 CAN WIRELESS MODULE
6035 CAN JOYSTICK
6041 CAN SWITCH
Primary Control Secondary Control
BOX
6041 CAN TETHER
1 1 1 1
2
2
1
VEHICLE POWER FOR
JOYSTICK OR
SWITCH BOX OR
TETHER
VEHICLE POWER FOR
DIRECTION INDICATOR VEHICLE POWER FOR
WIRELESS MODULE
6035 CAN JOYSTICK
6041 CAN SWITCH BOX
6041 CAN TETHER
DIGITAL
OUTPUTS
DIGITAL
INPUTS RELAY 2
OUTPUTS RELAY 1
OUTPUTS
4
3 3 3 3
5 6 7
GRAY
6032
UNIVERSAL II
CONTROLLER
J1
VEHICLE POWER
FOR UNIVERSAL II
OUTPUTS FOR:
H-BRIDGE #5
LOGIC 1-3
BISTABLE RELAY
INPUTS FOR:
SWITCHES 2-9
INPUT FOR:
AUX BATTERY
5
FIGURE: 4
7.50"
4.0"
UNIVERSAL CONTROL II
STYLE 6032
12/24 VOLTS DC
AKRON BRASS COMPANY
WOOSTER, OHIO
www.akronbrass.com
A
B
C
D
E
F G
H
J
K
L M
N
P
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17 18
19
20
21
22
23
24
25
26
27
28
29
Pin 1 - Vehicle B
Pin 2 - Vehicle Battery -
Pin 3 - Aux. B
Pin 4 - Aux. Battery -
Pin 5 - H-Bridge
Pin 6 - Axis #5
Pin 7 - Output #1
Pin 8 - Output #2
Pin 9 - Output #3
Pin 10 - Bi-stable Relay - COM
Pin 11 - Contact Output - N.O.
Pin 12 - (Form C) - N.C.
Pin 13 - Switch Input #1
Pin 14 - Switch Input #2
Pin 15 - Switch Input #3
Pin 16 - Switch Input #4
Pin 17 - Switch Input #5
Pin 18 - Switch Input #6
Pin 19 - Switch Input #7
Pin 20 - Switch Input #8
Pin 21 - Switch Input #9
Pin 22 - Aux. Power (1 Amp)
Pin 23 - Data + Vehicle
Pin 24 - Data - Can
Pin 25 - Common (Ground)
Pin 26 - Data + Proprietary
Pin 27 - Data - Can
Pin 28 - Data + VMUX-COM A
Pin 29 - Data - Network-COM B
Pin A - Analog Common
Pin B - Analog, Switch, PWM In #1
Pin C - Analog, Switch, PWM In #2
Pin D - Analog, Switch, PWM In #3
Pin E - Analog Exc.
Pin F - Appliance Loop - LIN
Pin G - H-Bridge
Pin H - Axis #1
Pin J - H-Bridge
Pin K - Axis #2
Pin L - H-Bridge
Pin M - Axis #3
Pin N - H-Bridge
Pin P - Axis #4
READ OPERATING INSTRUCTIONS BEFORE USE
NOTE:
THIS DETAIL IS FOR REFERENCE ONLY AND SHOULD NOT
BE USED TO CREATE THE GRAPHICS.
USE THE ADOBE ILLUSTRATOR FILE TO PRODUCE
THE ACTUAL SILKSCREEN GRAPHICS.
MATERIAL:
0.010 POLYCARBONATE WITH
3M 9471 PRESSURE SENSITIVE ADHESIVE.