AKCP UFLS, Руководство пользователя

Страница: 28 / 38

Ultrasonic Fuel Level Sensor Manual
Updated until firmware 405p & 1.0.3816 - 28 -
In the above Tank Configuration you will setup your tank if it is the Non-Linear type.
Next will be the advanced settings for the sensor.
On the "Advanced Settings" the sensor actually displays by default the value in % of liquid in the
tank. The Max and Base levels can be used to translate the % into quantity where the Base level
is the quantity when the sensor reads 0% and Max level is the quantity when the sensor reads
100%.