AKCP UFLS, Руководство пользователя

Страница: 29 / 38

Ultrasonic Fuel Level Sensor Manual
Updated until firmware 405p & 1.0.3816 - 29 -
Please see below for the Continuous Time and Minimum Time feature settings as this is the
same on both the securityProbe & SP+ units.
securityProbe base units
To begin make sure you have connected your fuel sensor to the base unit via the RJ45
connection, then navigate to the web interface of your module. This is shown below:-
Once you have Clicked on the sensors tab you be taken to the following page:-
N
ow we know the sensor has been identified by the system we will take a look at the sensor
settings.