AKCP UFLS, Руководство пользователя

Страница: 13 / 38

Ultrasonic Fuel Level Sensor Manual
Updated until firmware 405p & 1.0.3816 - 13 -
Case 1
The AKCP Invasive Fuel Sensor must be mounted at the deepest tank point! It is recommended
the sender is mounted in the middle of the tank, this is particularly important on low or no baffled
tanks that are mounted in moving vehicles or vessels. This allows the sensor to average waves of
fluid to the correct level when the depth is varying due to wave slop.
Case 2
AKCP Invasive Fuel Sensor must be mounted at least 150mm from a vertical tank baffle, tank
walls and piping.