AKCP UFLS, Руководство пользователя

Страница: 27 / 38

Ultrasonic Fuel Level Sensor Manual
Updated until firmware 405p & 1.0.3816 - 27 -
In the page shown above you can set your tanks alert threshold percentages. On the next page
the Tank Configuration setup will be explained. It is very important to set your tanks correct
configuration, either Linear or Non-Linear, or the sensor will not detect the fuel level properly.
Note: On the "Tank Configuration", settings linear tank configuration:
- The top limit is the distance between the sensor and liquid inside the tank when it is full.
This
value is only used for the Invasive UFLS type; the UFLS-NI (non-invasive) will ignore this setting.
- The bottom limit is the distance between the sensor and liquid inside the tank when it is empty.
UFLS UFLS-NI