Page 36
DD8
plus Version 2.20 - September 1998
The fields on the SCSI BACKUP page are:
TITLE
You may give the backup a title of up to ten characters. This will be stored
in the SCSI tape’s directory and you will be able to use this name to
selectively restore the backup in future if you have archived several dif-
ferent backups to the same tape. When you move the cursor to this field
by pressing the Title key (F1) the screen will change to allow a new name
to be entered. If you do not specifically give it a name, the default name
BACKUP will be used.
NOTE: As with any SCSI device, the tape’s SCSI ID should be unique and should not share
the same ID as another device on the SCSI buss.
BACKUP TYPE
This selects what will be backed up to the SCSI tape. You may select:
SELECTED FILES
You may, via F5 (SELECT), select specific files
to backup.
ALL PROJECTS
You may backup all the projects on the selected
disk.
ALL LIBRARIES
You may backup all the libraries on the selected
disk.
ALL PROJS & LIBS
You may backup all the projects and all the li-
braries on the selected disk.
ENTIRE DISK
You may backup everything on the disk.
BACKING UP SELECTED FILES
Choosing SELECTED FILES in the BACKUP TYPE field will show this screen:
To actually select the files, press SELECT (F5). You will see something like this screen:
You can select PROJECT or LIBRARY in the TYPE field, You may select a disk to backup in the
DISK field.
Press the File key (F2) to move the cursor to the list of files. To select the file you wish to backup,
move the cursor to the file name and press the SELECT key (F4/F5). A small block appears to
the left of the file name to indicate it is selected for archiving. For example:
DISK PAGES - 7