AJAX Systems MotionCam, Руководство пользователя

Страница: 9 / 32

integration modules.
Before adding a device
Only a user or PRO with administrator rights can add a device to the hub.
How to add MotionCam Outdoor to the system
To make sure MotionCam Outdoor is connected to the hub, the detector must be located
at the same secured facility as the system (within the range of the hub’s radio network).
The detector connected to the hub will appear in the list of hub devices in the
Ajax app. Updating the statuses of devices in the list depends on the Jeweller
1. Install the . Create an . Add a hub to the app and create at
least one virtual room.
Ajax app account
2. Make sure that the hub is on and has access to the internet (via Ethernet
cable, Wi-Fi, and/or mobile network). You can do this in the Ajax app or by
checking the hub logo on the faceplate. The logo should light up white or
green if the hub is connected to the network.
3. Make sure the hub is disarmed and does not start updates by checking its
status in the Ajax app.
Types of accounts and their rights
1. Open the . If your account has access to multiple hubs, select the
one to which you want to add MotionCam Outdoor.
Ajax app
2. Go to the Devices tab and click Add Device.
3. Name the detector, scan or type in the QR code (placed on the detector body
and the packaging), select a room and a group (if is enabled). group mode
4. Click Add; the countdown will begin.
5. Switch on the device by holding the power button for 3 seconds.