The higher the resolution, the more detailed the
image is. However, keep in mind that high
resolution will increase the delivery time of
photos to the hub
Send photo in case of alarm
Selecting the number of photos in case of
alarm:
Alarms with photo verification
Selecting the number of alarms that are
accompanied by photos. You can specify 1 to
10 alarms or set up the transmission of a photo
each time the device is triggered.
The limit is reset once the security system is
disarmed.
The setting is available only when the Always
Active option is disabled. In this mode, the
detector will always transmit photos in case of
alarm
Delay When Entering, s
Delay time when entering (5 to 120 seconds).
Delay when entering (alarm activation delay) is
the time the user has to disarm the security
system after entering the secured area
Delay When Leaving, s
Delay time when leaving (5 to 120 seconds).
Delay when leaving (arming delay) is the time
the user has to leave the secured area after
arming
No photo
1 photo
Series of 2
Series of 3
Series of 4 (only available at 320 × 176
resolution)
Series of 5 (only available at 320 × 176
resolution)
Содержание MotionCam
Страница 32: ......
