AJAX Systems MotionCam, Руководство пользователя

Страница: 4 / 32

The detector doesn’t go into the armed mode instantly. The time for switching to armed
mode depends on two factors: exit delays (specified in the detector settings) and the
hub – detector ping interval (Jeweller settings, the default value is 36 seconds). In the
first case, the delay is set by the user. In the second case, the delay is caused by the fact
that the hub notifies the detector about the transition to the armed mode not instantly,
but within one ping interval.
The range of motion detection is set manually — with a scrollbar on the detector
body — and is from 3 to 15 meters. This allows you to accurately set the
detection area and avoid false triggerings on bushes, trees, or other objects.
Users know exactly where motion is detected. The notifications contain the
name of the hub (name of the guarded object), the name of the device, and the
virtual room to which the detector is assigned.
Photo veri cation of alarms
When the detector is triggered, the built-in MotionCam Outdoor camera can take
1 to 5 images with a resolution of 320 × 176 and up to 3 images with a
resolution of 640 × 352 pixels. The detector has infrared illumination for
shooting in the dark, which is activated only when an alarm is raised.
A series of photos are played back in the app as animation, which allows you to
evaluate the incident in dynamics. Photos are available both in Ajax apps and in