AJAX Systems MotionCam, Руководство пользователя

Страница: 8 / 32

MotionCam Outdoor features two independent IR sensors, the signals of which
are analyzed by a two-stage LISA algorithm. As soon as both IR sensors detect
movement, LISA performs correlation and spectral analysis of the signals, which
allows you to instantly distinguish between real threats and interference.
Correlation analysis
Each time a motion is detected, the LISA algorithm analyzes and compares the
waveforms of two signals in real-time. If the waveforms are similar, the detector
triggers an alarm.
Spectral analysis
When both sensors detect motion, but correlation analysis does not reveal
sufficient similarity of waveforms, LISA compares the frequency components of
the signals from the two sensors.
Sending events to the monitoring station
The Ajax security system can transmit alarms to the central monitoring station
(CMS) in such protocol formats as Sur-Gard (ContactID), SIA DC-09, and other
proprietary protocols. A complete list of supported protocols is
.
The device ID and the loop (zone) number can be found in . Note that
photos are sent to the monitoring station of the security company only if the
CMS software supports the transmission of photo verifications. The list of
CMSs that support Ajax photo verification is
.
Photo verifications are available in the without additional setup.
Adding to the system
The detector is incompatible with Hub and Hub Plus hubs, ReX radio signal range
extender, third-party security central units, as well as ocBridge Plus and uartBridge
available here
Which CMSs can the Ajax security system be connected to
its states
available here
Ajax PRO Desktop CMS