manualshive.com logo in svg

AJA FS2, Инструкция по установке и эксплуатации, Страница: 99 / 120

Поделиться
Скачать
AJA FS2 Скачать руководство пользователя страница 99

FS2 Frame Synchronizer/Converter v3.0 99 www.aja.com

 

Chapter 6 – SNMP

FS2 Simple Network Management Protocol

SNMP is defined as a “simple network management protocol” and was specified 

as a component of the internet protocol suite by the Internet Engineering 

Task Force (IETF). The FS2 can act as a network element that issues SNMP trap 

messages signaling a detected alarm condition or other system condition. A 

device’s trap messages are defined in an MIB (Management Information Base) 

file. The trap messages are sent to a server-based external NMS destination. 

For example, the FS2 could send a trap message if one of its redundant power 

supplies becomes unplugged. A client software agent that communicates with 

the NMS might then get a message telling the operator what has happened.
The FS2 must be configured for SNMP messaging. By default SNMP is disabled 

on the FS2. Besides activating SNMP, trap destinations must also be defined with 

fixed IP addresses. 
When SNMP is enabled, one or more of these alarms may be sent by the FS2 to 

the client network management system (NMS) as a trap message:

•  fs2PowerSupplyAlarm (PS1 Alarm)
•  fs2 PowerSupply2Alarm (PS2 Alarm)
•  fs2ReferenceAlarm (Ref Video Alarm)
•  fs2Vid1ReferenceAlarm (Vid1 Ref Video Alarm)
•  fs2Vid2ReferenceAlarm (Vid2 Ref Video Alarm)
•  fs2Vid1FormatAlarm (Vid1 Format Alarm)
•  fs2Vid1BackgroundAlarm (Vid1 Background Format Alarm)
•  fs2Vid2FormatAlarm (Vid2 Format Alarm)
•  fs2Vid2BackgroundAlarm (Vid2 Background Format Alarm)
•  fs2OverTemperatureAlarm (FS2 Over Temperature Alarm)

SNMP Configuration

FS2 SNMP configuration can be accomplished using the front panel or with the 

web browser computer interface (if Remote Control is enabled). 

Front Panel Screens

The FS2 front panel screens for SNMP are accessible through the CONFIG button. 

The direct SNMP configuration screens are:

•  4.0 SNMP Enable
•  4.1 SNMP Trap Destination 1
•  4.2 SNMP Trap Port 1
•  4.3 SNMP Trap Destination 2
•  4.4 SNMP Trap Port 2

These SNMP direct configuration parameters are described later in this chapter. 

Содержание FS2

























































































































Отзывы:

Нет отзывов