AJA FS2 Скачать руководство пользователя страница 20

Страница: 20 / 120

FS2 Frame Synchronizer/Converter v3.0 20 www.aja.com

RS-422

DB-15 connector reserved for future use.

GPI

The GPI DB-15 connector provides connection to external equipment or circuits

via an isolated TTL-compatible interface. Four GPI inputs and four outputs are

available. See

"GPI Pinouts" on page 107

Using the REMOTE menu group, you can program the actions of the GPI inputs

and outputs individually. Contact closures on the inputs can trigger a wide variety

of FS2 functions. Alarms or loss of video can trigger the GPI outputs.

10/100/1000 LAN

This RJ45 connector provides an Ethernet 10/100/1000 port for connection

directly to a computer or to a LAN through an Ethernet hub or switch.

SDI Fiber In/Out (optional)

Two optional Optical Fiber SFP modules support single- or dual-channel Fiber

Input and/or Output. 3G/HD/SD SDI protocol is supported. Only AJA Optical

Fiber SFP modules are supported—use of other manufacturer’s modules is not

supported and may void warranty.

SDI In/Out

Digital video with embedded audio. Two SDI Input and two SDI Output BNCs. 10

bit 3G/HD/SD SDI is supported.

HDMI In/Out

HDMI In and Out is supported on HDMI connectors. Standard SD and HD video

formats are supported, including support for 8 channel embedded audio. Also

supports standard computer DVI video formats (input via a DVI to HDMI cable).

HDCP (copy protected) HDMI video is not supported.

Component In/Out YPbPr/RGB Video

Component Analog Video is supported on 3x BNCs for Input and Output. Video

A/D and D/A converters are 12-bit and support both SD and HD. YPbPr format

is supported or the outputs can be switched to RGB. Additionally, with v 1.1

firmware composite analog video is supported.

Composite In/Out

Composite NTSC or PAL standard definition Input and Output. Composite Video

A/D and D/A converters are 12-bit.

Ref Loop

The Reference Loop BNCs accept an Output timing reference signal. The

reference can be SD Blackburst or HD tri-level sync. Examples of permissible

reference video input signals:

•  525 Color Black
•  625 Color Black
•  1080i Tri-level Sync
•  720p Tri-level Sync

The 2 BNCs are a passive loop: one BNC is for the Input, and the remaining BNC

can be connected to another piece of equipment in the reference chain or

terminated.

Содержание FS2

























































































































Результаты поиска

Содержание FS2

Отзывы:

AJA FS2, Инструкция по установке и эксплуатации, Страница: 20 / 120

Результаты поиска

Содержание FS2

Отзывы: