FS2 Frame Synchronizer/Converter v3.0 17 www.aja.com
Function
Knob Action
Take (commit) a change to an edited parameter.
Automatic after a few seconds for most
parameters. For multiple field parameters,
push ADJUST momentarily to save.
Abandon (undo) a change before committing.
Push SELECT momentarily.
Take (commit) a special action, such as a preset recall.
Push ADJUST momentarily.
LED Indicators
Indicators on the front panel are multi-state LEDs that light when a condition is
present. They are conveniently arranged in groups to show specific subjects. For
example, indicators for the two video processors are aligned in two columns with
1 and 2 labeling the tops of the columns.
The indicators and the conditions that cause them to light are as follows:
REMOTE
A multicolor LED that indicates the current control mode:
• Green = Local Only (front panel control only)
• Red = Remote Only (remote browser or panel control only)
• Amber = Local + Remote (front panel and remote control both enabled)
VID IN 1/2 (blue)
An active video input signal is detected for Channel 1 or 2.
UFC 1/2 (blue
The Universal Format Converter has been changed from the default setting for
Channel 1 or 2.
PROC AMP 1/2 (blue)
The Proc Amp has been changed from the default setting for Channel 1 or
Channel 2 (it’s no longer at unity).
FMT ERR 1/2 (blue)
The selected input and output formats are incompatible for Channel 1 or Channel
2.
REF (blue)
The REF connector has an external reference video source applied.
KEYER (blue)
Reserved for future use.
LAN (blue)
The FS2 is connected to an operational local area network. This indicator lights
momentarily when web browser selections are changed.
EXT (blue flashing)
Flashes when a remote control source (remote panel or GPI) has initiated a
change in the system.