AJA FS2 Скачать руководство пользователя страница 91

Страница: 91 / 120

FS2 Frame Synchronizer/Converter v3.0 91 www.aja.com

Hidden Menus

This selection lets you choose whether to hide or show inactive menus.

Hide Inactive (default)

Show All

Hides menus that are not in use.

Shows all menus, even those that are not in use.

Display Intensity

Display Intensity determines alphanumeric display and front panel LED

brightness.

Variable

Use the slider to dim or brighten the alphanumeric display and

activity indicator LEDs in steps from 1 (dim) to 8 (brightest).

Default is 6

UPnP Host

UPnP Host enables the FS2 to be discovered by a Windows network.

Enable (default)

Disable

Enables the FS2 to be discovered by a Windows network.

Disables Windows network discovery of the FS2.

When this parameter is enabled, you can view the FS2 on a Windows Network by

clicking these selections in Windows 7: Start > Computer > Network (in left pane).

Any FS2s on the network will be listed under Other Devices below Computers

and Media Devices. If your system does not have network discovery enabled, you

may need to enable it following the Windows help instructions to make network

devices visible in the Windows Network window.

UPnP Proxy

UPnP Proxy enables the FS2 to serve as a proxy for other AJA devices, allowing

them to be discovered on a Windows network through the FS2. When enabled,

the FS2 acts as a proxy for all the AJA devices that it is able to connect to that

have not already been discovered on the network. The devices will be listed in the

FS2 Network window. Once the devices appear on the network, they can connect

directly to other devices and computers without involving the FS2.

Enable (default)

Disable

Enables the FS2 to connect other AJA devices to the network.

Disables the FS2 from serving as a proxy for AJA devices.

Содержание FS2

























































































































Результаты поиска

Содержание FS2

Отзывы:

AJA FS2, Инструкция по установке и эксплуатации, Страница: 91 / 120

Результаты поиска

Содержание FS2

Отзывы: