Airwell YCV280, Инструкция по установке и обслуживанию

Страница: 360 / 412

COOL , HEAT and DRY Operation
1. Unit start
Press ON/OFF button,unit starts.
Previous operation status appears on LCD (except for TIMER, SLEEP and
SWING setting)
2.Select operation mode
Press MODE button. At each press, operation mode changes as follows:
follows:
In HEAT mode,warm air will blow out after a short period of time
due to anti-cold function.
3.Temperature setting
Press TEMP button.
4.Adjust FAN button
Press FAN button. At each press, fan speed changes as follows:
Air conditioner will run at the selected fan speed.
COOL operation starts
when room temp.is
higher than temp.setting.
Every time the button is pressed, temp. setting increases 1degree. If button is kept depressed, temp.
setting will increase quickly.
Every time the button is pressed, temp. setting decreases 1degree. If button is kept depressed, temp.
setting will decrease quickly.
Set proper temperature
A
U
T
O
LOW
MID
HIGH AUTO
FRESH
HIGH/SO TIMER
SET
FILTER
B
HEALTH
RESET
LOCK
SLEEP
FAN
TEMP
ON
OFF
SWING
MODE
CLOCK
CODE
LIGHT
A
U
T
O
1
5
4
COOL
DRY HEAT
Then select operation or select operation or select operation
COOL
DRY
HEAT
5. Unit stop
Press ON/OFF button, unit stops
Ultra-low air flow
On reaching temp. setting
+2 C, unit will run in mild
DRY mode.
Temp. s2 C
HEAT
366