Airwell GC 24 DCI, Руководство по обслуживанию

Страница: 33 / 55

OPTIONAL ACCESSORIES
12-6 Revision 0 Service Manual - KXL DCI
z
When the unit is in Heat mode, the correction is defined as follow:
D
erCTT
-7 -6 -5 -4 -3 -2 -1 0 1 2 3 4 5 6 7
≥ 49 1 1 2 3 4 5 5 6 6 7 8 9 10 12 13
46, 48 0 1 1 2 3 4 4 5 5 6 6 8 9 11 12
43, 45 0 0 1 1 2 3 3 4 4 5 5 7 8 10 11
40, 42 0 0 0 1 1 2 2 3 3 4 5 6 7 9 10
37, 39 0 0 0 0 1 1 2 3 3 3 4 5 6 8 10
34, 36 -1 -1 0 0 0 1 2 3 3 3 3 4 6 7 9
31, 33 -1 -1 -1 0 0 0 1 3 3 3 3 4 5 7 8
28, 30 -2 -2 -1 -1 0 0 0 2 3 3 3 3 5 6 8
25, 27 -2 -2 -1 -1 0 0 0 2 2 3 3 3 4 6 8
22, 24 -2 -2 -2 -1 -1 0 0 2 2 2 3 3 4 6 7
12, 21 -2 -2 -2 -1 -1 0 0 0 1 1 2 3 4 5 7
9, 11 -3 -2 -2 -1 -1 -1 -1 -1 0 0 1 2 3 5 7
6, 8 -3 -3 -2 -1 -1 -1 -1 -1 0 0 0 1 2 4 6
3, 5 -3 -3 -2 -2 -2 -2 -2 -2 0 0 0 0 1 3 5
0, 2 -3 -3 -2 -2 -2 -2 -2 -2 0 0 0 0 0 1 3
-3, -1 -3 -3 -3 -3 -3 -3 -3 -2 0 0 0 0 0 0 1
-6, -4 -4 -4 -3 -3 -3 -3 -3 -2 0 0 0 0 0 0 0
-9, -7 -5 -4 -4 -3 -3 -3 -3 -2 0 0 0 0 0 0 0
CTT- ICT
<=-10 -6 -5 -4 -4 -3 -3 -3 -3 0 0 0 0 0 0 0
12.1.10 RV(Reversing Valve) Control
Reversing valve is on in heat mode.
Switching of RV state is done only after compressor is off for over 3 minutes.
12.1.11 Ioniser Control
Ioniser is on when unit is on ,AND indoor fan is on ,AND Ioniser power switch (on Ioniser) is on.
12.1.12 Base Heater Control
The base heater will be working only when RV is “ON” according to the following graphics
ON
OFF
OAT
0
2
Base
Heater
When OAT is faulty the base heater will be “ON” continuously in HEAT mode.
12.2 Fan Mode
In high/ medium/ low indoor fan user setting, unit will operate fan in selected speed.
In AutoFan user setting, fan speed will be adjusted automatically according to the difference
between actual room temperature and user set point temperature.