Airwell CKD 036, Руководство по обслуживанию

Страница: 91 / 122

13-16
TROUBLESHOOTING
SM CKDDCI 2-A.3 GB
11) Connect the “COM“ side of the tester to the “N” terminal
of driver and the “V

” side of the tester to “T/RB” of
driver, measure the diode voltage.
Voltage should be “OL” (Over Load).
Replacing driver - (
14.1.15
)
13.5.5.2
GC 60 DCI
Remove all the terminals of the driver before checking.
If items 1) to 8)
are performed and the results are satisfactory, driver is normal.
Use a digital multi meter in diode checking function
1) Connect the “COM“ side of the tester to the “CAPA-”
terminal of driver and the “V

” side of the tester to “LIVE”
and “NEUTRAL” of driver, measure the diode voltage.
Voltage should be “OL” (Over Load).
2) Connect the “V

” side of the tester to the “CAPA-”
terminal of driver and the “COM” side of the tester to
“LIVE” and “NEUTRAL” of driver, measure the diode
voltage.
Voltage should be 0.4~0.8VDC.
3) Connect the “COM“ side of the tester to the “CAPA+”
terminal of driver and the “V

” side of the tester to “LIVE”
and "NEUTRAL" of driver, measure the diode voltage.
Voltage should be 0.4~0.8VDC.
4) Connect the “V

” side of the tester to the “CAPA+”
terminal of driver and the “COM” side of the tester to
“LIVE” and "NEUTRAL" of driver, measure the diode
voltage.
Voltage should be “OL” (Over Load).
RB
S
R
P1
N
P
U
V
W
OL
OL
N
V
W
U
L
CAPA-
CAPA+
W
U
CAPA-
L
N
V
CAPA+
0.5
0.5
W
U
CAPA-
L
N
V
CAPA+
OL
W
U
CAPA-
L
N
V
CAPA+