AirMan SDG60S-7A6, Инструкция по эксплуатации

Страница: 41 / 61

5. Periodic Inspection/Maintenance
5
-
4
H990432
5.5 Maintenance
5.5.1 Change Engine Oil
[At 50 hours for the first change and every 500 hours thereafter]
When checking, replenishing, and draining the engine oil, be sure
to wait 10 to 20 minutes after engine stops until it cools down.
Engine oil is very hot and highly pressurized during or just after the
operation. Hot oil could blow out and can cause injury.
< Procedure >
①
Remove the drain plug “1”provided outside the ma-
chine. Open the drain valve “2” inside the machine to
drain the engine oil condensate.
②
After having drained the condensate, install the drain
plug “1” and close the drain valve “2”. Replenish en-
gine oil by removing the cap of the engine oil filler
port
“
3
”
.
③
After finishing the oil supply, tighten the cap of oil
filter port
“
3
”
firmly.
④
Before starting operation, make sure to check the en-
gine oil level whether it is proper.
A070011
1 2 3
Caution in filling or draining engine oil