AirMan PDS185S-6E1, Руководство по обслуживанию

Страница: 14 / 103

1. Specification
1-8
1.5.1 Indicator lamp
[Indicator lamp]
Turn the starter switch to
“RUN”
position. Then the lamp goes on.
Item Contents Measures Monitor
GLOW
When starter switch is placed to
“RUN”
,
the lamp goes on and after preheating is
finished, the lamp will be off.
―
CHARGE
Lamp goes on when alternator is not
charging.
Check wiring
Check alternator
[Warning d isplay]
This displays such trouble of less importance when it occurs during operation,
but the unit continues operating.
When any abnormality happens, a ERROR CODE lamp flickers. In this time
when ERROR CODE switch is pressed, a error code will be displayed.
Item
Error
code
Contents
DISCHARGE TEMP. H A1
Lamp flickers when the air temperature at the outlet of the
air-end reaches 239°F (115
℃
).
WATER TEMP. H A2 Lamp flickers when coolant temperature reaches 221°F (105
℃
).
COMP. AIR FILTER A3
It is displays when air filter gets clogged and suction resistance
increases.
[Operating resistance: More than 0.062bar(6.23kPa)]
ENG. AIR FILTER A4
CHARGE A5
Belt loosened and/or cut
Faulty generation of alternator
[Emergency d isplay]
When any trouble takes place during operation, this displays and it stops as
an emergency stop.
When any abnormality happens, a ERROR CODE lamp flickers. In this time
when ERROR CODE switch is pressed, a error code will be displayed.
Item
Error
code
Contents
DISCHARGE TEMP. H E1
It is displays when the air temperature at the outlet of the
air-end reaches 248°F (120
℃
).
WATER TEMP. H E2 It is displays when coolant temperature reaches 230°F (110
℃
).
ENG. OIL PRESS. E3
It is displays when engine oil pressure drops.
【
Function pressure: 7.1psi(0.049MPa)[0.49bar]
】
DISCHARGE TEMP.
SENSOR
E6
It is displayed when air temperature sensor at the outlet port of
compressor air-end is disconnected.
WATER TEMP. SENSOR E7
It is displayed when engine water temperature sensor is
disconnected.
Discount-Equipment.com