21
© Airflow • We reserve the right to make changes without prior notice
DV50 DV80
(Integral CO
2
Sensor)
USING THE UNIT
TEMPERATURES AND SENSORS
VIEWING THE BOOST PROFILE INFORMATION
To view the
Boost profile
settings, proceed as follows:
1. Open the
Boost
profile main view.
2. Press the
Profile information
button.
3. The first information screen for the profile is opened.
This screen contains the following information:
• Supply air
— Indicates the temperature of the air blown in to
the property and its set value shown in brackets, if the supply
air is warmer than the set value.
•
Outdoor air
— Indicates the outdoor air temperature.
• Fan speed
— Indicates the fan speed. If the automatic fan
speed
boost
is turned on, the set value is shown in brackets
first followed by the actual fan speed.
•
Cell status
— Indicates the status of the ventilation unit heat
recovery cell. Possible statuses are:
• Heat recovery
— The heat recovery cell heats the air
streaming in from outdoors.
• Cooling
— The heat recovery cell cools the air streaming
in from outdoors.
• Cell bypass
— The inflowing air bypasses the heat
recovery cell.
• Defrosting
— The heat recovery cell is being defrosted.
4. Press the
Right arrow
button.
5. The second information display for the profile opens.
This display shows the following information:
•
Humidity
— Indicates the highest relative humidity of air
measured by the extract air sensor.
•
Carbon dioxide
— Indicates the highest carbon dioxide level
measured by the extract air sensor.
•
Change filters
— Indicates the next recommended filter
change date.
•
Days in use
— Indicates how long the unit has been running
in days and years.
VIEWING THE FIREPLACE PROFILE
INFORMATION
If you want to view the Fireplace function settings, proceed as
follows:
1. Open the
Fireplace function
main view.
2. The profile main screen contains a summary of the profile
data. Also see Table 2, “Profile symbols.
