33
© Airflow • We reserve the right to make changes without prior notice
DV50 DV80
(Integral CO
2
Sensor)
USING THE UNIT
SETTINGS
TIME AND DATE
SETTING THE DATE
To set the date, proceed as follows:
1. Select
Settings > Time and date.
2. Press the
OK
button.
3. The
Time
and
date
settings are opened.
4. Press the
Right arrow
until the display 4/4 appears.
5. Use the
Plus
and
Minus
buttons to set the date.
6. Press the
Right arrow
button.
7. Use the
Plus
and
Minus
buttons to set the month.
8. Press the
Right arrow
button.
9. Use the
Plus
and
Minus
buttons to set the year.
10. Press the
OK
button.
WEEK CLOCK
The week clock allows you to program a weekly program for the
ventilation unit. The program controls the unit by changing the
ventilation profile. You can set one of the following conditions for
each hour of the week:
• At Home
— Use the
At home
profile.
• Away
— Use the
Away
profile.
• Boost
— Use the
Boost
profile.
• Blank — Do not change the profile.
NOTE
If you change the profile manually when the Week clock is on, the
selected profile will be active until the Week clock switches to the
next profile in the program.
If the humidity or carbon dioxide sensors control the ventilation,
they will adjust the fan speed, regardless of whether the profile has
been manually selected or selected by the Week clock.
ENABLING THE WEEK CLOCK ON
To turn the Week clock on, proceed as follows:
1. Select
Settings > Week clock.
2. Press the
OK
button.
3. The week view in the week clock is displayed.
4. Press the
Settings
button.
5.
The Week clock menu
appears.
6. Select
Turn on.
7. Press the
Select
button.
8. A confirmation screen is opened.
TIP
You can switch the week clock
ON
or
OFF
by pressing the
OK
button in the
Week clock
screen for a few seconds.
