29
© Airflow • We reserve the right to make changes without prior notice
DV50 DV80
(Integral CO
2
Sensor)
USING THE UNIT
SETTINGS
FILTER SETTINGS
When you want to browse through the filter settings, proceed as
follows:
1. Select
Settings > Filter.
2. Press the
OK
button.
3. The filter status summary screen is opened.
4. This screen contains the following information:
• Filters changed
— Indicates the date when the filter was
last replaced.
• Next reminder
— Indicates the date when a reminder to
replace the filter will next be shown.
• Reminder interval
— Indicates the filter replacement
interval in months.
SETTING THE DATE THE FILTER WERE
LAST REPLACED
This section describes how to enter information in the control panel
on replacing the ventilation unit filter. Replacing the filter itself is
described in the ventilation unit maintenance instructions.
When you want to set the date when you replaced the ventilation
unit filter, proceed as follows
:
1. Select
Settings > Filter.
2. Press the
OK
button.
3. The filter status summary screen is opened.
4. Press the
Edit
button.
5. The
Filter status
1/2 screen is opened.
6. Press the
Plus
button. The
Filters changed
field value
changes to
Today.
7. Press the
OK
button.
