Airflow Adroit DV50 Скачать руководство пользователя

Страница: 39 / 54

DV50 DV80

(Integral CO

Sensor)

MAINTENANCE

MAINTENANCE INSTRUCTIONS

FANS

Check the cleanliness of the fans when servicing the filters

and the heat recovery cell. Clean the fans as required. You

can clean the fan blades with compressed air or by brushing

them gently. Do not remove or move the fan blade balancing

weights.

WARNING

The fans are extremely sensitive to external shocks, and to

minimize risk of damage to them It is recommended that the

fans be cleaned in place, i.e. without attempting to remove

them.

CLEANING THE SUPPLY AIR FAN

NOTE

Remove the fan beds and the bypass duct

carefully in accordance with the below instructions

to prevent damage. The small size of the unit

restricts the space available for servicing.

REMOVING AND CLEANING THE SUPPLY

AIR FAN

This section describes how to remove the supply air fan

of the right handed unit. The steps are mirrored for the left

handed unit.

To remove and clean the supply air fan:

1. Disconnect the ventilation unit from the mains

electricity supply.

2. Turn the latch to open the door of the ventilation unit.

3. Lift the door off.

4. Remove the extract air filter (C), the cell top bracket (E)

and the heat recovery cell (D), as described in sections

“Filters” and “Heat recovery cell”.

5. Remove the mounting screws of the fan bed (2).

6. Pull the bypass duct/filter stand package out of the unit

and turn to the right.

7. Remove the cable connector (black) of the fan and

move the supply air fan slightly to the right.

8. Remove the post heating radiator connector. The post

heating radiator connector can be removed once the

supply air fan has been moved slightly to the right.

9. Tilt the supply air fan to the right and push the

connectors out of the way. Turn the fan 90° and tilt it

forward to pull it out of the unit.

10. The fan has now been removed for cleaning.

11. To reassemble the ventilation unit, follow the above

steps in reverse order.

12. Close the door and plug the unit back into the mains.

13. The fan has now been checked and cleaned.

NOTE

Install the fan beds in a reverse order.

Содержание Adroit DV50























































Результаты поиска

Содержание Adroit DV50

Отзывы:

Похожие инструкции для Adroit DV50

Бренды по названию

Популярные бренды

Airflow Adroit DV50, Инструкция по эксплуатации

Результаты поиска

Содержание Adroit DV50

Отзывы:

Похожие инструкции для Adroit DV50

Бренды по названию

Популярные бренды