Airdog ADII, Руководство пользователя

Страница: 27 / 75

26
• Fully charge the battery before each flight.
• Never charge a battery that is still warm from usage and never use a battery that is
still warm from charging.
• If the battery is disconnected during charging process, simply reconnect the battery to
the charger and charging will resume.
• Never store an empty battery (less than three solid LEDs) for a long period of time!
• Charge it fully after use and it will automatically self-discharge to safe storage capacity.
• Charge the battery only with an original Airdog battery charger.
Once the battery is connected to the charger, the battery will emit a beep and the LED
indicators on the battery will display the current battery level with the last LED slowly
dimming on and off indicating that it is charging.
To charge the battery:
1. Connect the Airdog battery charger to a wall outlet with the appropriate power cord
(100-240V, 50/60Hz).
2. Connect the battery to the charger.
3. When the battery level has reached a 100% charge, battery will emit 3 short beeps
the LEDs will not be lit.
Normal charging time should take approximately 3 hours and ADII's battery is rechargeable
for over 100 full cycles. After 100 cycles, the battery may provide less than 80% of its original
capacity.
5.5 Battery Firmware Update
The battery will automatically check if it needs a firmware update every time it is inserted into
the drone. If the message:
“Battery update required, press

” appears on AirLeash display,