Airdog ADII, Руководство пользователя

Страница: 55 / 75

54
21. A message: “CALIBRATING Hold steady” will appear, do not move the drone while
this message is visible.
22. When you hear a different tone and see the message
“Place

BELLY UP on a
surface”, flip the drone “belly up”, place it on a level surface and place your arms
underneath the battery:
23. A message:
“CALIBRATING Hold steady”
will appear, do not move the drone while
this message is visible.
24. When you hear a different tone and see the message
"Place

BELLY DOWN on a
surface", flip the drone “belly down” , place it on a level surface:
25. When you hear the
“success”
tone and see the message
“Calibration COMPLETED
Press” , short press on Power/OK

button to complete the calibration process and
restart the drone.
26. During calibration you may see these error messages:
• If you get “This SIDE is DONE, rotate

to a different side”, then change the
drones position, hold it steady and the calibration will resume.
• If you get
“FAILED motion detected Scroll dwn. for info”
, then retry the calibration
and hold the drone really steady in each position.
• If the error persists calibrate the drones gyro and then retry the magnetometer
calibration. If you get “FAILED wrong angle Scroll dwn. for info” , then retry the
calibration again and make sure the drone is placed at a 90º angle respective to the
ground level in each position.
Place

BELLY DOWN
on a surface
Place

BELLY UP
on a surface