CHAPTER 8: SENSOR CALIBRATION
43
23. Hold AirLeash steady with Display facing DOWN until you hear a tone and see a
24. During calibration you may see the following error messages:
• If you get
“This SIDE is DONE, rotate
to a
different side”
, then rotate
AirLeash
and make sure that the “This SIDE up” message is readable, hold it steady,
the calibra tion will resume.
• If you get “
FAILED motion detected Scroll dwn. for info”,
then retry the
calibration and hold AirLeash really steady in each position. If the error persists
calibrate AirLeash gyro and then retry the Magnetometer calibration.
• If you get
“FAILED wrong angle Scroll dwn. for info”
, then retry the calibration
again and hold AirLeash at a 90º angle (respective to the ground level).
8.2.2 AirLeash Accelerometer (Accel) Calibration
Calibrate Accelerometer on AirLeash
only
if the error message:
“Accel Failed!
Calibrate Accel”
displayed on AirLeash during the AirLeash Preflight Check.
Follow the steps below to complete accel calibration. Make sure to hold AirLeash
steady and level (at a 90º angle respective to a surface) in each axis position. Do not
move AirLeash when it displays the message
“CALIBRATING Hold steady”.
AirLeash Accel calibration process:
1. Turn on AirLeash by long pressing (3 sec.) the Power/OK
button.
2. Short press the Menu
button to enter Menu.
3. Navigate through the Menu with arrow left
or right
buttons until you see the
Settings
icon on the AirLeash display.
4. Short press the Power/OK
button to enter Settings.
5. Navigate through the Settings with arrow left
or right
buttons until you see the
Calibration
icon on the display.
6. Short press on the Power/OK
button to enter the Calibration menu.
7. Navigate through the Calibration menu with arrow left
or right
buttons until
you see the AirLeash calibration
icon.
8. Short press the Power/OK
button to enter AirLeash Calibration menu.
You can scroll down with arrow down
button to read the calibration tips or short
press the Power/OK
button to start the calibration. It is strongly advised to
watch the calibration videos at help.airdog.com before you calibrate any sensors!
Содержание ADII
Страница 1: ...AIRDOG USER MANUAL V 4 DECEMBER 2017 ...