CHAPTER 4:
AIRLEASH WEARABLE CONTROLLER OVERVIEW
23
When you see the message:
“Not paired press
to pair”
on AirLeash display, then
continue reading the instructions below, starting on step 6.
To pair Airdog ADII with AirLeash follow these steps:
1. Turn on ADII by inserting the battery into the drone and long pressing (3 sec.) the Power
button (located on the battery itself).
2. Turn on AirLeash by long pressing (3 sec.) the Power/OK
button.
3. Short press the Menu
button on AirLeash, navigate through the Menu with arrow
left
or right
buttons until you see the Settings
icon on the AirLeash display.
4. Short press the Power/OK
button to enter Settings.
5. Navigate through the Settings with arrow left
or right
buttons until you see Pairing
icon on the AirLeash display.
6. Short press the Power/OK
button and a warning message: “Are you sure?” will pop up,
short press the Power/OK
button again to enable pairing mode on AirLeash.
7. To enable pairing mode on the drone, long press (3 sec.) the
“tail button”
until you hear a
long beep and drones LEDs begin flashing rapidly with blue color:
8. The pairing process can take up to 1 minute. Pairing is successful when the Blue
“Leashed”
LED on AirLeash lights up with solid blue color and you see the drones battery
level on AirLeash display.
9. After you have successfully paired your AirLeash with ADII, long press (3 sec.) the
“tail
button”
on the drone until you hear a long beep and LEDs stop flashing rapidly with blue
color.
Содержание ADII
Страница 1: ...AIRDOG USER MANUAL V 4 DECEMBER 2017 ...
