Air Techniques AirStar AS12CINT, Инструкция по установке и эксплуатации

Страница: 14 / 20

Air Techniques, Inc. Page 14
AS12, AS22, AS50, AS70,
AS12C, AS22C, & AS50C
I n t e r n a t i o n a l
Like all precision products, your AIRSTAR requires a certain amount of care on a regularly
scheduled basis . A well-organized maintenance program aids dependable equipment operation
and reduces problems to a minimum . Routine checks help to detect general overall wear, and
replacement of parts can often be made before a problem occurs .
Understanding this, we have established minimum maintenance requirements listed below
that include routine inspections and the replacement of filters using preventive maintenance
kits available for the specific AIRSTAR model . Adherence to this recommended maintenance
schedule will ensure that the equipment will continue performing at its best with uninterrupted
service .

Routine Inspection - Monthly
Clean exterior surfaces .
Check for abnormal noises and air leaks .
Make sure that no flammable, corrosive, or combustible materials are stored in
the equipment room (especially in the area around the equipment) .
Check operational range of pressure switch is between 85-115 psi .
Inspect the Moisture Monitor (Figure 4) for a color change:
Blue indicates that the air in the storage tank is dry .
Pink indicates a high level of humidity is in the storage tank . See TROUBLESHOOTING
page 13 to correct this situation .
Note: To comply with NFPA 99C, a 5-micron Filter is installed on the output of all AIRSTAR models .

Routine Inspection - Yearly
Refer to Figure 4 and check the Service Indicator on the 5-micron Outlet Filter .
Red indicates that the filter must be replaced P/N 87168.
Green indicates No service is required .
Figure 4.
Moisture Monitor and 5-Micron Filter Location
MAINTENANCE
Moisture
Monitor
5 Micron
Filter
Service
Indicator