Installing the software
Installing the Mega Cam Manager
Do not connect the Camera to the USB port until the Camera-
Manager has been completely installed
!
!
¾
The camera cannot be used with Windows 95 or NT
¾
When using Windows 98, insure that it is the second edition (SE)
- Page 15 -
Follow the installation wizard’s instructions.
The necessary data will be copied to the hard drive.
Click on the “eye” symbol to start the installation
- Page 16 -
Once instructed to do so, click on
“finish” to complete the installation
Attention Windows 2000 and XP users!
Depending on your system configuration, the following message may
appear. Click on “continue anyway” to continue the installation.
Place the “Mega Camera” CD into the
CDROM drive, the CD should start
automatically. If the setup window
does not automatically appear, click
on START / RUN and enter
“D:\setup.exe in the space provided.
Exchange the “D” to correspond with
your CDROM–Drive letter. Press
RETURN.
Installing the AVI-Decoder
The AVI-Decoder is required if you desire to save Video-Data using the
Proprietary-Format
To install the AVI-Decoder, do the following:
Place the “Mega Camera” CD into the CDROM drive and click on START /
RUN and enter “D:\avidecode.exe in the space provided. Exchange the “D”
to correspond with your CDROM – Drive letter. Press RETURN.
