AIMS Power PICOGLF12W12V120AL Скачать руководство пользователя страница 14

Страница: 14 / 27

AIMS Power

www.aimscorp.net

2.5.7 Remote Control

In addition to the switch panel on the front (or top) of the inverter, there are two optional remotes

An LCD

remote panel that provides more detailed info or an LED remote that provides on/off with a few LED

indicators. The LCD remote panel connects to the RJ45 port on the DC side of the inverter displays several

statuses of the inverter (sold separately Part # REMOTELF). Use with port labeled LCD remote. If you

want a more simple on/off remote, consider the LED remote (sold separately Part # REMOTELFLED).

Use with port labeled LED remote.

If an extra switch panel is connected to the inverter via “remote control port”, together with the panel on

the inverter case, the two panels will be connected and operated in parallel.

Whichever first switches from “Off” to “Power saver off” or “Power saver on”, it will power the inverter

on.

If the commands from the two panels conflict, the inverter will operate according to the following priority:

Power saver on> Power saver off> Power off

Only when both panels are turned to the “Unit Off” position, will the inverter be powered off.

The max length of the cable is 60 feet.

Remote LED - REMOTELFLED

The remote LED has on/off and power save

switch

. There are also 3 indicator LEDs for

the battery charger, inverter mode and faults.

Remote LCD - REMOTELF

The remote LCD displays detailed

information of the inverter.

Содержание PICOGLF12W12V120AL




























Результаты поиска

Содержание PICOGLF12W12V120AL

Отзывы:

Похожие инструкции для PICOGLF12W12V120AL

Бренды по названию

Популярные бренды

AIMS Power PICOGLF12W12V120AL, Руководство пользователя

Результаты поиска

Содержание PICOGLF12W12V120AL

Отзывы:

Похожие инструкции для PICOGLF12W12V120AL

Бренды по названию

Популярные бренды