Aim AXC-FDX-2, Руководство по оборудованию

Страница: 27 / 31

4 . Technical Data
AXC-FDX-2 Hardware Manual 19
Trigger Out: Output with TTL Level and fast ESD protection diodes.
Additional varistors on the Front IO nearby connector to suppress
peaks of glitches. High Pulse width strobe, is programmable
between 500ns-16µs duration.
Discrete IO
: User definable Input/Output selection done via software,
Input High voltage 3.0V min 35.0V max
Input Low voltage 0.0V min 0.8V max
Output High voltage minimum 4V default, external voltage up to
maximum 35V
Output Low voltage 0.4V maximum
Maximum Sink Current of each open collector 50 mA
Please note: When the default 5V for the discrete outputs are not used, provide a serial
resistor in line with the open collector transistor. If using a discrete pin as input, make
sure that the output mode is set to default before connecting an external voltage.
Otherwise the transistor can be damaged. (see chapter Discrete I/O).
Dimensions:
Single width XMC standard: 149.0mm x 74.0mm
Weight : AXC-FDX-2 appr. 100g
Supply Voltage : Standard PC
– 3.3V +/- 5%
Power Consumption:
Temperature:
0°C to +60°C Standard Operating
-20°C to +75°C Extended Temperature on request
-55°C to +120°C Storage Temperature.
Humidity:
0% to 95% non-condensing
AXC-FDX-2
1Gb/s 10/100 Mb/s
+ 3.3V 5,5 W 4,7 W