Aim AXC-FDX-2, Руководство по оборудованию

Страница: 15 / 31

2 . Instalation
AXC-FDX-2 Hardware Manual 7
2.3.3 AXC-FDX-2 Rear I/O Interface
Instead of using the front panel interface, the P14 PMC Rear I/O connector can be used
to access Trigger lines, Discrete I/O and the PXI Trigger Interface.
Please Note: Reserved pins may be already assigned for board maintenance
functionality, and therefore it is prohibited to connect them. Reserved pins must be left
unconnected. Otherwise the board could take serious damage.
PMC Connector P14
Pin Signal Signal Pin
1 Reserved Reserved 2
3 Reserved Reserved 4
5 Reserved Reserved 6
7 Reserved Reserved 8
9 Signal-GND Signal-GND 10
11 Signal-GND Signal-GND 12
13 Reserved Reserved 14
15 Signal-GND Reserved 16
17 Signal-GND Reserved 18
19 Reserved Reserved 20
21 IRIG OUT Reserved 22
23 IRIG IN Reserved 24
25 Discrete IO1 Discrete IO3 26
27 Discrete IO2 Discrete IO4 28
29 Trigger In 1 Trigger In 3 30
31 Trigger Out 1 Trigger Out 3 32
33 Trigger In 2 Trigger In 4 34
35 Trigger Out 2 Trigger Out 4 36
37 Reserved Reserved 38
39 Reserved Reserved 40
41 PXI Trigger OE 4 Reserved 42
43 PXI Trigger OE 3 PXI GA 0 44
45 PXI Trigger OE 2 PXI GA 1 46
47 PXI Trigger OE 1 PXI GA 2 48
49 PXI STAR PXI GA 3 50
51 PXI Clock 10MHz PXI GA 4 52
53 Reserved Reserved 54
55 Reserved Reserved 56
57 Reserved Reserved 58
59 Reserved Reserved 60
61 Reserved Reserved 62
63 Reserved Reserved 64
Table 2-3 PMC P14 Rear I/O Pin Assignment