Agria 8000 Скачать руководство пользователя страница 48

Страница: 48 / 64

5 Maintenance and Repair

Brush mower

agria 8000

Engine

Only clean the engine with a cloth. Do not spray

with water, as water could enter the ignition and

fuel system and cause malfunctions.

Storage

If the machine is out of operation for an extended period:

(1)

Clean

. Touch up the paint.

(2) Spray

all bare parts

with bio corrosion-inhibiting oil.

(3)

Preserve the engine.

Petrol engine

•

Completely drain the fuel outdoors into a suitable container.

Petrol is highly flammable and explosive under certain conditions!

Never smoke in the working area. Stay away from naked flames and

sparks.

Alternatively

fill the fuel tank completely and add a fuel stabilizer (Agria no.

799 09) to the fuel

- Observe the operation instructions!

Let the engine run for approximately 10

minutes.

•

Change engine oil.

•

Fill a teaspoon (approximately 0.03 l) of engine oil into the sparking-plug hole.

Slowly crank the engine.

•

Reinstall the sparking plug and set the piston with the cable-pull starter to com-

pression (slowly pull at the starter handle until you can feel resistance). The

valves are now closed.

•

Slowly crank the engine every 2...3 weeks (sparking-plug connector removed!)

and set the piston back to compression.

Содержание 8000

































































Результаты поиска

Содержание 8000

Отзывы:

Похожие инструкции для 8000

Бренды по названию

Популярные бренды

Agria 8000, Перевод оригинальной инструкции по эксплуатации

Результаты поиска

Содержание 8000

Отзывы:

Похожие инструкции для 8000

Бренды по названию

Популярные бренды