Agria 8000, Перевод оригинальной инструкции по эксплуатации

Страница: 19 / 64

3 Devices and Operating Elements
Brush mower agria 8000 19
3 Devices and Operating Elements
The brush mower agria 8000 is de-
signed exclusively for cutting thin, non-
woody brushwood, grass and similar
plants in agriculture, forestry, green area
and grounds maintenance. The lower
rotating mower disc must slide on the
ground. However, it is not suitable for
lawns in parks! (Intended use)
When using the machine on public roads
– and during transport – the national
road traffic regulations of the relevant
country must be complied with (marking,
lighting, etc.).
Engine
The four-stoke petrol engine is to be
used with standard petrol (see chapter
Startup, page 25).
During the first 20 hours of operation
(running-in period) do not use the engine
at full power.
The rule of never using the engine at a
higher speed than necessary for the
work in hand applies even after the
running-in period .
High speeds are detrimental to
all engines and significantly reduce
their service life. This especially ap-
plies for no-load operation! Over-
revving the engine (letting it roar) can
result in immediate damage.
Cooling
The engine is cooled with an air blower.
Keep the fan grille at the cable-pull
starter and the cooling fins of the cylin-
der free of dirt and aspirated plant de-
bris.
Idling
Always ensure that the engine idle
speed is adjusted correctly. With speed
regulating lever at idling, the engine
should continue running smoothly.
- agria-Service -
Air filter
The air filter cleans the aspirated air. A
contaminated filter reduces the engine
output.
Ignition system
The petrol engine is equipped with a
contactless electronic ignition system.
We recommend that any necessary
inspections are carried out by a skilled
person only.