Agria 8000 Скачать руководство пользователя страница 25

Страница: 25 / 64

4 Commissioning and Operation

Brush mower

agria 8000

4 Commissioning and Operation

Commissioning

Petrol engine

Please note that the engine's service life and operational reliability are heavily de-

pendent on the running-in time. Always allow a cold engine to warm up for a few

minutes first of all and do not run up to full power immediately.
During the first

hours of operation (running-in period) do not use the engine at

full power.

Attention:

The engine is not filled up with

engine oil for transport reasons!

Fill the engine with engine oil before first

commissioning, but do not go beyond the

maximum level!

Engine operating instructions

This engine runs smoothly with conventional

unleaded regular and premium petrol (also

E10)

as well as

Super plus.

Do not add oil to petrol.

Only use fresh, clean fuel (no older than 3

months) and only use approved fuel cans avail-

able from specialist dealers. Do not use rusted

metal cans or plastic containers which are not

fuel-resistant.

Always remember good filter care and

clean fuel. Use only branded petrol.

Caution is needed when handling fuel.

Petrol is highly flammable and explosive

under certain conditions!

Do not refuel in closed rooms.

Refuel only with the engine switched off and

cooled down.

Содержание 8000

































































Результаты поиска

Содержание 8000

Отзывы:

Похожие инструкции для 8000

Бренды по названию

Популярные бренды

Agria 8000, Перевод оригинальной инструкции по эксплуатации

Результаты поиска

Содержание 8000

Отзывы:

Похожие инструкции для 8000

Бренды по названию

Популярные бренды