Agria 8000 Скачать руководство пользователя страница 38

Страница: 38 / 64

5 Maintenance and Repair

Brush mower

agria 8000

5 Maintenance and Repair

As well as observing the operating

instructions valid for the machine, it is

equally important to pay due attention to

the following instructions on care and

maintenance.
Larger maintenance and repair tasks

may only be carried out by trained spe-

cialists who can carry out professional

maintenance and repair.
You should only undertake smaller

maintenance and repair tasks yourself if

you have the relevant tools and training

for machinery and combustion engines.
Only use genuine Agria spare parts.
Carry out a functional and safety test

after completing the work.

Lubricants and anti-corrosive agents

Use the lubricants specified for engine

and gearbox (see "Technical data").
For "open" lubricating points or nipple

lubricating points we recommend

bio

lubricating oil

bio lubricating

grease

(as specified in the operating

instructions).
We recommend using

bio-anti-

corrosive oil

to preserve machines and

attachments (do not apply on painted

covers). The oil can be brushed or

sprayed on.
Bio-lubricants and bio-anti-corrosive

agents are environmentally friendly, as

they are quickly biodegradable.
By using bio-lubricants and bio-slushing

oil you act environmentally responsible,

protecting the environment and promot-

ing the well-being of humans, animals

and plants.

Always switch off the engine before

you start any maintenance or repair

work!

Persons with cardiac pacemak-

ers are not allowed to check the igni-

tion system or to work on the ignition

system.

Additionally remove the sparking-

plug connector of a petrol engine!

Wear protective gloves when you

work on the mowing and tilling tools!

When working with oil, fuel and

grease, wear suitable protective

gloves and use skin care products if

necessary.

Содержание 8000

































































Результаты поиска

Содержание 8000

Отзывы:

Похожие инструкции для 8000

Бренды по названию

Популярные бренды

Agria 8000, Перевод оригинальной инструкции по эксплуатации

Результаты поиска

Содержание 8000

Отзывы:

Похожие инструкции для 8000

Бренды по названию

Популярные бренды