What's New
1
Agilent InfiniiVision 7000A Series Oscilloscopes Programmer's Guide
27
What's New in Version 5.20
New features in version 5.20 of the InfiniiVision 7000 Series oscilloscope
software are:
•
Mask testing, enabled with Option LMT.
•
Tracking cursors (markers) have been added.
•
Measurement statistics have been added.
•
Labels can now be up to 10 characters.
More detailed descriptions of the new and changed commands appear
below.
New Commands
Command
Description
:ACQuire:SEGMented:ANALyze (see
Calculates measurement statistics and/or
infinite persistence over all segments that have
been acquired.
:CALibrate:OUTPut (see
Selects the signal output on the rear panel
TRIG OUT BNC.
:HARDcopy:LAYout (see
)
Sets the hardcopy layout mode.
:MEASure:RESults (see
)
Returns measurement statistics values.
:MEASure:STATistics (see
Sets the type of measurement statistics to
return.
:MEASure:STATistics:INCRement (see
Updates the statistics once (incrementing the
count by one) using the current measurement
values.
:MEASure:STATistics:RESet (see
Resets the measurement statistics values.
:MTEenable (Mask Test Event Enable Register)
(see
)
Sets a mask in the Mask Test Event Enable
register.
:MTERegister[:EVENt] (Mask Test Event Event
Register) (see
)
Returns the integer value contained in the
Mask Test Event Event Register and clears the
register.
Commands and queries to control the mask
test (Option LMT) features.
Recalls a mask.
:SAVE:MASK[:STARt] (see
Saves the current mask.
:SAVE:WAVeform:SEGMented (see
)
Specifies which segments are included when
the waveform is saved.
:TRIGger:UART:BASE (see
Selects the front panel UART/RS232 trigger
setup data selection option from HEX or
BINary.
Содержание InfiniiVision 7000A Series
