IDP-7 Dry Scroll Vacuum Pump
4
DRAFT 1/19/17
Environmental Conditions,
Compliance and Utility
Requirements
Environmental Conditions
This equipment meets the following IEC classifications:
❑
Pollution Degree 2 (See Note.)
❑
Installation Category II (See Note.)
❑
Equipment Class 1
Electromagnetic Compatibility
EN55011/CISPR11
Group 1 ISM equipment
: Group 1 contains all ISM
equipment in which there is intentionally generated
and/or used conductively coupled radio-frequency
energy which is necessary for the internal functioning of
the equipment itself.
Class A equipment
is equipment suitable for use in all
establishments other than domestic and those directly
connected to a low voltage power supply network which
supplies buildings used for domestic purposes.
This device complies with the requirements of CISPR11,
Group 1, Class A as radiation professional equipment.
Therefore, there may be potential difficulties in ensuring
electromagnetic compatibility in other environments, due
to conducted as well as radiated disturbances.
Operation is subject to the following two conditions:
❑
This device may not cause harmful interference.
❑
This device must accept any interference received,
including interference that may cause undesired oper-
ation.
If this equipment does cause harmful interference to radio
or television reception, which can be determined by turn-
ing the equipment off and on, the user is encouraged to
try one or more of the following measures:
❑
Make sure that appropriate cables are used to connect
the device to peripheral equipment.
❑
Changes or modifications not expressly approved by
Agilent Technologies could void the user's authority to
operate the equipment.
South Korean Class A EMC declaration
This equipment is Class A suitable for professional use
and is for use in electromagnetic environments outside of
the home.
ICES/NMB-001
This ISM device complies with Canadian ICES-001.
Cet appareil ISM est conforme à la norme NMB-001 du
Canada.
NOTE
Pollution level describes the degree to
which a solid, liquid, or gas which dete-
riorates dielectric strength is adhering. 2
applies to a normal indoor atmosphere.
Installation category implies the regula-
tion for impulse withstand voltage. It is
also called the Over voltage category. II
applies to electrical equipment.
This equipment requires the following
space for ventilation, maintenances
access, and easy access to the Main
Power Breaker Switch. There must be a
clear space of at least 60 cm (24") on all
sides of the equipment. The bench in
your laboratory must be able to support
the entire system and other laboratory
equipment.
