Agilent Technologies E8285A, Руководство пользователя, Страница: 112 / 390

111
Chapter 4, Status Reporting
GPIB Status Register Groups
Table 4 Calibrating Status Register Group Condition Register Bit Assignments
Bit Number
Is Condition
Register
Implemented?
Condition Comment
15 Not Used (Always 0) Defined by SCPI Version 1994.0
14 Unused in the Test Set
13 Unused in the Test Set
12 Unused in the Test Set
11 Unused in the Test Set
10 Unused in the Test Set
9 Unused in the Test Set
8 Unused in the Test Set
7 Unused in the Test Set
6 Unused in the Test Set
5 Unused in the Test Set
4 Unused in the Test Set
3 Unused in the Test Set
2
NO
a CDMA Baseband calibration Calibrating CDMA Baseband Physical
Channels
1
NO
a
a. Although a Condition register is implemented, the Test Set will not parse out or execute GPIB com-
mands while this operation is taking place. Consequently, a query of the Condition register will not be
executed until after the calibration attempt has completed, and will never indicate a “true” condition.
Always query the Event register, and when the calibration attempt has completed an Event register query
result will be returned and will show which bit was latched by the initiation of a calibration attempt.
.
Channel power calibration Calibrating Channel Power
measurement.
0
NO
a Digital power zeroing Average power measurements zeroed
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com