Agilent Technologies E2050, Руководство по установке и настройке

Страница: 90 / 111

90 Chapter 5
Troubleshooting
Troubleshooting Gateway Configuration
4 If the Gateway is powered on, configured, but you do not know the
IP address:
n
Press the
Config Preset
button on the back panel of the
LAN/GPIB Gateway. This forces the Gateway to temporarily
use the
192.0.0.192
default IP address without modifying
any other configuration values.
n
Make sure the route table entry for the Gateway at its default IP
address is setup via the
route
command on the client system.
n
Telnet to
192.0.0.192
and look at the setting of the
bootp:
ON/OFF
configuration value to determine the configuration
method used.
n
Execute a Telnet
reboot
command. If no values were
changed, the Gateway will use the same configuration method
and have the same configuration values (IP address, etc.) as
previously set.
NOTE
If you are unable to make a Telnet connection using the default IP
address (
192.0.0.192
), try pressing the
Config Preset
button again
and then Telnet to
192.0.0.192
.
CAUTION
Any client operations in progress and client connections will be
terminated by the
reboot
command.