Agilent Technologies E2050, Руководство по установке и настройке

Страница: 69 / 111

Chapter 4 69
Administration
Using the Telnet Utility
Command Description
allow: IP_address(es)
Set the IP allow list configuration value for the Gateway.
bootp: ON/OFF
Turn ON or OFF the use of BOOTP or BOOTP with TFTP
configuration of the Gateway.
bye
Quit the Telnet utility without saving configuration changes.
config
Display the current configuration settings for the Gateway.
default-gw: IP_address
Set the default subnet gateway address configuration value for
the Gateway.
exit
Exit the Telnet utility without saving configuration changes.
factory-reset
Reset the Gateway to its default configuration values and reboot
the Gateway.
hardware-addr
Display the Gateway’s LAN hardware address.
help
Print help information on the main Telnet commands.
hostname: string
Set the Internet domain name configuration value for the Gateway.
hpib-address: 0-30
Set the GPIB address configuration value for the Gateway.
hpib-name: string
Set the GPIB interface symbolic name configuration value for the
Gateway.
hpib-unit: 1-255
Set GPIB logical unit number configuration value for the Gateway.
io-timeout: seconds
Set the server I/O timeout configuration value for the Gateway.
ip: IP_address
Set the IP address configuration value for the Gateway.
lan-timeout: seconds
Set the LAN connect timeout configuration value for the Gateway.
quit
Quit the Telnet utility without saving configuration changes.
reboot
Save configuration changes and restart the Gateway.
status
Display the status of the Gateway and client connections.
subnet-mask: mask
Set the network subnet mask configuration value for the Gateway.
syslog-clear
Clear the syslog file.
syslog-display
Display the syslog file’s contents.
syslog-svr: IP_address
Set the syslog server address configuration value for the Gateway.
version
Display the version of the Gateway’s firmware.