Agilent Technologies E2050, Руководство по установке и настройке

Страница: 48 / 111

48 Chapter 3
Configuration
Configuration Methods
For each configuration value to change or set, use the syntax:
Telnet_command: value
Enter .
For example, to set the IP address
value of
156.140.222.201
for the Gateway, enter:
ip: 156.140.222.201
Enter
If you
make a mistake, re-enter the correct configuration value you
want. To do this, use the same syntax as before to re-enter the
value (
Telnet_command: value
Enter
).
If you want to exit without saving any of the configuration values you
have changed or set, enter either
exit Enter
or
quit Enter
. You
can then re-enter the Telnet configuration utility starting with Step 6.
Any time during the Telnet session, you can enter
config Enter
to
view the current configuration settings. Any time during the Telnet
session, you can enter
? Enter
for a list of available commands you
can use in the Telnet utility.
11 When you have changed or set all the configuration values you want
for the Gateway, type
reboot Enter
. Then, type
y Enter
to confirm
your changes. Rebooting activates the configuration values you
have set for the Gateway.
12 After you have rebooted the Gateway, test that the Gateway has
been successfully configured by using the
ping
command. This
command allows you to test general network connectivity between
your client computer system and the LAN/GPIB Gateway. At the
client system, type:
ping
hostname (or) IP_address
Enter
For example, using a Gateway’s hostname:
ping E2050.agilent.com Enter
Or, using a Gateway’s IP address:
ping 156.140.4.249 Enter
CAUTION
If you are reconfiguring the Gateway, any client operations in progress
and client connections will be terminated by the
reboot
command.