AGFA SLIDEWRITER, Руководство пользователя

Страница: 7 / 49

Power
Requirements
EMI/RFI
Space
Requirements
CAUTION
Environmental
Requirements
Film Types
The SlideWriter requires either 110 VAC, 60 Hz or 220 VAC, 50 Hz
depending on individual power specifications. The SlideWriter's
power requirements are on the serial number identification label
located on the rear of the unit.
The SlideWriter draws approximately 1.5 Amps. Before installing it,
ensure that adequate power is available. Because the SlideWriter is
a precision electro-optical device, it is important that the voltage
specifications and power requirements are specifically adhered to.
If the power system has other large electrical machinery connected
to it, or it is subject to variations such as transients, voltage sags
and surges, or brownouts, use a use a power line conditioner such
as the Elgar Power Line Conditioner (PLC) Model PLC 250.
This equipment has been tested and complies with the limits for a
computing device in accordance with the specifications in Subpart J,
Part 15, Class A, of FCC rules.
The SlideWriter film recorder measures 17.7 (length) x 11.5 (width)
x 35.8 (height with wheels) inches (450 x 292 x 910 mm). It weighs
42 Ibs. (19 kg). Because the SlideWriter stands vertically, 17.7 x
11.5 inches constitutes the required floor space. Keep the space
above the unit clear to facilitate film loading.
The internal CRT uses magnetic coils to position an electronic
imaging beam. Although the SlideWriter contains shields from external
magnetic fields, it should be located as far as possible from
computer tape drives, disk drives, fans, or any other device with
magnetic switching. This will minimize interference from these devices
during imaging.
Storage Temperature: 32° to 158° F (0° to 70° C)
Operating Temperature: 59° to 86° F (15° to 30° C)
Relative Humidity: 35% to 65% non-condensing
The SlideWriter supports Kodak Ektachrome ASA 100 35mm film and
Polacolor HC 35mm instant slide film.
2