Agatec EZDigPro, Руководство пользователя и калибровки

Страница: 87 / 99

- 87 -
EZDigPro
User & Calibration Manual
ENTER A PROFILE BY MANUALLY SETTING DEPTH & REACH VALUES
Start with the bucket on the first profile point (the start point, furthest away from the cab), zeroing the depth and reach
value on the main operator working screen (figure P1 on previous page). Select the desired profile as described
previously to reach Figure P2.
Press with the cursor over “Manual” to enter the profile “manual” mode.
Press with the cursor over “Depth” to set the depth of the selected profile point.
Press with the cursor over “Reach” to set the reach of the selected profile point.
Use at the end of the page to set the next point.
When all settings are done, press to exit from the profile setting mode.
The profile shape will be shown on the screen. See “Profile View” page.
-
[usage] Profile Setting
Figure P3
Profile:
Use
Edit
Delete
Set the profile:
Automatic
Manual
Figure P6 Figure P7
PROFILE: 1
Point: 1
Depth 0.000
Reach 0.000
Slope 0.00
Advanced Mode
Enter
Enter
Enter
Enter
Enter