Agatec EZDigPro, Руководство пользователя и калибровки

Страница: 69 / 99

- 69 -
EZDigPro
User & Calibration Manual
[usage] Laser Function
An external laser transmitter can be used to have an absolute reference height.
The use of the laser has 2 advantages:
1) There’s no cumulative error moving the excavator.
2) It’s possible to dig in many different places. Just move the excavator to the new place and catch the laser beam again
with the laser receiver (no need to transport the height step by step).
Every time that the excavator is moved (including tilted), you must press to activate the laser receiver and move it
slowly through the laser beam. After the laser has been caught, you can continue to work.
Press to enable the laser receiver sensor. The laser beam page will appear
indicating that the system is waiting for a laser acquisition.
Move the machine's booms up or down slowly and steadily until the laser sensor catches
the laser level beam. When caught, the control box will “beep” indicating acquisition and
show a STOP sign. After 2-3 seconds the STOP sign disappears and the laser page will
be shown again. Don’t move any element during this time!
If no laser acquisition will be done within 15 seconds with the laser page shown, the laser
sensor will be automatically switched off and the control box will return to the previous
screen.
When the depth is affected by the laser function a center line indicating the distance from
the laser beam to the reference zero point (target “zero” depth) is shown.
Advanced Mode
LASER REFERENCE