AGA SIX-FOUR DC6 FFD Скачать руководство пользователя страница 11

Страница: 11 / 48

Pan supports

The pan supports are marked

L (left)

C (centre)

R (right)

the underside and must locate in the recesses in the hotplate

casting.

IMPORTANT

It is very

important

for the performance and reliability of the

hob that the pan supports are fitted in accordance with the

AGA SIX-FOUR SERIES - DC6 OWNERS MANUAL.
To help identify the correct location of the pan supports, the

centre pan support has been uniquely designed with tab, as

shown (

Fig. 3.3

). This pan support must be fitted in the rear

centre position with the tag pointing towards the back of the

appliance.

Griddle plate

The griddle plate is designed for use

ONLY

on your AGA DC6

Natural Gas appliance.
It

MUST

only be used on the right hand rapid burners.

It should be positioned on the pan supports as below to

ensure correct and safe operation.

Using the Griddle
BEFORE POSITIONING THE GRIDDLE PLATE ON THE PAN

SUPPORTS, THE BURNERS SHOULD BE LIT AND TURNED

DOWN TO THE SIMMER POSITION.

Preheat the griddle plate for 5 - 10 minutes before starting to

cook on it.
It should not be necessary to use any extra fat when griddle

cooking. This will only affect the efficiency of the non-stick

cooking and will make cleaning more difficult.
Always use utensils which will not scratch the special non-

stick surface i.e. nylon, wood and non-stick.

DO NOT

use sharp utensils such as forks or knives.

DO NOT

use or rest saucepans on the griddle plate.

The griddle plate can be removed and taken to the sink for

washing.
It should only be necessary to use hot soapy water to clean

the griddle as abrasive cleaners will damage the surface.
In the event of heavy soiling only nylon pan scourers should

be used with care.
The griddle plate should be washed in hot soapy water.

DO NOT

use abrasives. It is not suitable for cleaning in a

dishwasher.

DESN 517172

Fig. 3.4

DESN 517165

Fig. 3.3

LOCATING TAB

Содержание SIX-FOUR DC6 FFD

















































Результаты поиска

Содержание SIX-FOUR DC6 FFD

Отзывы:

Похожие инструкции для SIX-FOUR DC6 FFD

Бренды по названию

Популярные бренды

AGA SIX-FOUR DC6 FFD, Руководство пользователя и инструкции по установке

Результаты поиска

Содержание SIX-FOUR DC6 FFD

Отзывы:

Похожие инструкции для SIX-FOUR DC6 FFD

Бренды по названию

Популярные бренды