manualshive.com logo in svg

AGA SIX-FOUR DC6 FFD, Руководство пользователя и инструкции по установке

Поделиться
Скачать
AGA SIX-FOUR DC6 FFD Скачать руководство пользователя страница 46

42

O.  TO REMOVE ELEMENTS (SIMMERING OVEN)

1. 

Isolate from electrical supply.

2. 

Remove oven base panel (1) screw at the rear of the 

oven.

3. 

Lift out base panel.

4. 

Remove oven element fixing screws (2) at the rear of 

the oven and flex elements to remove from location 

bracket, pull forwards to expose terminal connections.

5. 

Remove connection, make sure they do not fall down 

the back of the appliance.

6. 

Re-assemble in reverse order.

P. 

TO REMOVE A FAN OVEN ELEMENT

1. 

Isolate from electric supply.

2. 

Remove (4) fan cover fixing screws and withdraw panel.

3. 

Remove 3 screws securing element to frame and 

carefully withdraw element until access can be made to 

the electrical terminals.

4. 

Disconnect terminals taking care not to allow the cable 

to fall down the rear of the appliance.

5. 

Re-assemble in reverse order.

Q.  TO REMOVE OVEN FAN

1. 

Isolate from electric supply.

2. 

Proceed as ‘

TO REMOVE A FAN OVEN ELEMENT

’.

3. 

Remove 4 fixing screws securing fan assembly to frame.

4. 

Remove upper and lower baffle plates.

5. 

Withdraw fan assembly sufficiently to gain access to 

motor electrical terminals and disconnect cables.

6. 

Remove fan blade.

NOTE

: Fan blade fixing nuts is left hand thread.

7. 

Remove motor from mounting plate screws.

8. 

Re-assemble in reverse order.

Содержание SIX-FOUR DC6 FFD

















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды