34
DESN 517165
DESN 513137
DESN 517166
Fig. 12.12
Fig. 12.14
Fig. 12.13
LOCATING TAB
Pan supports
It is important for performance and reliability that the pan
supports are fitted correctly. The pan supports are marked
L
(left)
,
C (centre)
,
R (right)
on the underside and must locate
in the recesses in the hotplate casting.
IMPORTANT
It is very important for the performance and reliability of the
hob that the pan supports are fitted in accordance with the
AGA SIX-FOUR SERIES - DC6 OWNERS MANUAL.
To help identify the correct location of the pan supports, the
centre pan support has been uniquely designed with tab, as
shown (
Fig. 12.12
). This pan support must be fitted in the
rear centre position with the tag pointing towards the back of
the appliance.
To adjust pan support level
1.
Loosen retaining nut using 8mm spanner (
Fig. 12.13
).
2.
To prevent rocking adjust the pan support foot using 2
1/2 mm allen key.
3.
Check pan support is level with opposing pan supports.
4.
Retighten retaining nut.
Handrail fitting
1.
Position handrail assembly onto locating studs at each
end of facia. Ensure the grub screw at each end of the
hand rail is facing downwards.
2.
Push handrail assembly fully against facia and lock in
place by tightening 2 grub screws (2 1/2 mm) (
Fig. 12.5
).
Splashback
Locate tabs on rear of splashback assembly, into the brackets
on the upper rear of the cooker (
Fig. 12.14
). Push fully into
place.
RETAINING NUT